UFO 30 Kopfstelle 8fach- DVB-S(2) - DVB-

UFO 30 Kopfstelle 8fach- DVB-S(2) - DVB-

UFO 30 nano-headend DVB-S(2) - DVB-C(J.83A)

Order no.: 20610146

  • Stand-alone headend with an integrated power supply unit
  • Delivered pre-programmed

Features

  • Stand-alone headend with an integrated power supply unit
  • Transmodulates eight QPSK/8PSK modulated DVB-S(2) signals into eight fixed adjacent QAM-modulated DVB-C output signals
  • Delivered pre-programmed
  • Excellent technical data with FPGA processed direct transmodulation
  • High energy efficiency, power consumption: typ. 20 W
  • Two Sat-IF inputs A/B, configurable
  • All transmission parameters can be set using the USW 30 management software
    • To change the standard configuration, the UFZ 30 programming cable (Order no. 20410058) is additionally required
  • MPEG transport stream processor:
    • To set a constant output data rate (Stuffing) with PCR correction
    • With programme filter to remove individual TV and radio programmes
  • Without extractor fans, for wall mounting (noiseless)

Technical Data

Feature Unit Value
Inputs
Sat-IF input 2 x F-type coonectors, 75 Ohm
Frequency range MHz 950 ... 2,150
Decoupling TER/SAT typ. dB Min. 25
Return loss dB Typ. 6
Front end
DVB-S2 8 x
Frequency steps MHz 1 (950 ... 2,150 MHz)
AFC adjustment range MHz ± 3 (Symbol rate < 10 Ms/s) ± 5 (Symbol rate > 10 Ms/s) (950 ... 2,150 MHz
Input level range dBµV 60 ... 110
Permissible level difference dB 12
Demodulation DVB-S
Standard EN 300 421 (1)
Input symbol rate QPSK MS/s 2 ... 45
Code rate (Viterbi) 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
Roll off % 35
Demodulation DVB-S2
Standard EN 302 307 (2)
Input symbol rate QPSK MS/s 1 ... 34
Code rate (LDPC) 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Input symbol rate 8PSK MS/s 1 ... 28.9
Code rate (LDPC) 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Roll off % 20/25/35
MPEG-TS processor
Programme filter
PID filter
PSI/SI processing PCR correction
Stuffing automatic
QAM modulator
Output channels 8 x DVB-C (J.83A) as adjacent channels
QAM constellation QAM 16, 32, 64, 128, 256
Symbol rate MS/s 2.25 ... 7.25
Roll off % 15
RF output
DVB-C output 1 x F-type connector/75 Ohm
Frequency range MHz 47 ... 1,006 (fine adjustment in 250 kHz steps)
Frequency range (channel list) MHz 110 ... 1006 (settable over the channel list)
Return loss dB 14 (47 MHz) -1.5 dB/oct.
Output level dBµV 91
Setting range output level dB -20 (in 0.5 dB steps)
Level stability dB Typ. ± 0.5
Frequency stability ppm Typ. 35
MER dB Typ. >= 45
Roll-off attenuation dB >= 60 (at standard level)
Spurious emissions dB >= 60
System data
Power consumption W Typ. 25
Temperature range °C 0 ... +40
Mains voltage V 230 ± 10%
Dimensions (H x W x D) mm 282 x 240 x 60
Weight kg 2.5
VPE 1 1
EAN 1 4021121523694
Customs tariff number 85256000
| Manuals | Firmware | Programm lists | Software tools | USB driver |

Manuals:

  • Bedienungsanleitung für Kathrein-Service-Tool „KUBdate“

    Download | pdf-File | 1.02 MB | 01.10.2009
  • Information for the update of UFO Compact transcoder

    For UFO®compact: 

    • UFO 313
    • UFO 331
    • UFO 333
    • UFO 351/TP
    • UFO 353
    • UFO 357
    • UFO 364
    • UFO 371
    • UFO 372
    • UFO 373
    • UFO 378/TP
    • UFO 382
    • UFO 383
    • UFO 384
    • UFO 391
    • UFO 393
    • UFO 394
    • UFO 395
    • UFZ 394
    Download | pdf-File | 30.55 KB | 21.05.2008


Firmware:

  • Firmware for UFO 30 - Version V02

    Verbesserungen/Neuerungen:

    • Allgemeine Funktions- und Stabilitätsverbesserungen.
    Download | zip-File | 1.40 MB | 12.01.2015

Programm lists:

  • UFO 30 - Pre-programmed programme list UFOnano ÖR channels in HD (July 2015)

    The programme table (configuration file) contains the German public broadcasting HD channels for expansion.

    Download | zip-File | 32.04 KB | 27.07.2015
  • UFO 30 - Pre-programmed programme list UFOnano ÖR and regional channels in SD (July 2015)

    The programme table (configuration file) contains the German public broadcasting as well as the private regional channels in SD.

    Download | zip-File | 32.53 KB | 27.07.2015
  • UFO 30 - Pre-programmed programme list UFOnano regional and private channels in SD (July 2015)

    The programme table (configuration file) contains the German private regional channels as well as the private channels in SD.

    Download | zip-File | 502.07 KB | 27.07.2015
  • UFO 30 - Pre-programmed programme list UFOnano main channels ÖR and private channels with Church channels in SD (July 2015)

    The programme table (configuration file) contains the main channels of the German public as well as private channels as also the Church channel.

    Download | zip-File | 32.80 KB | 27.07.2015
  • UFO 30 - Pre-programmed programme list UFOnano main channels ÖR and private with Church & Sport Channels in SD (July 2015)

    The programme table (configuration file) contains the main channels of the German public as well as private channels as also the Church and sports channels.

    Download | zip-File | 33.25 KB | 27.07.2015
  • UFO 30 - Pre-programmed programme list UFOnano main channels ÖR and private with Sport & Music Channels in SD (July 2015)

    The programme table (configuration file) contains the main programs of the German public as well as private channels as also the sports and music channels.

    Download | zip-File | 33.33 KB | 27.07.2015
  • UFO 30 - Pre-programmed programs list UFOnano with international language pack 1 in SD (July 2015)

    The programme table (configuration file) contains the international channels which are broadcast via satellite ASTRA 19.2 ° East.

    Download | zip-File | 51.86 KB | 27.07.2015
  • UFO 30 - Pre-programmed programs list UFOnano with international language pack 2 in SD (July 2015)

    The programme table (configuration file) contains the international channels which are broadcast via satellite EUTELSAT 13 ° East.

    Download | zip-File | 52.34 KB | 27.07.2015

Software tools:

  • Management software USW 800 version 2.7.0 for Windows

    Changes and improvements

    Version 2.6.0 to 2.7.0:

    • Integration of the UFO 87-18
    • Integration of the UFO 87-187/CI

    Version 2.5.0 to 2.6.0:

     

    • Integration of the UFO 848

    Version 2.4.1 to 2.5.0:

     

    • Display "Analog signaling" at satellite inputs changed to "14/18V,22kHz"
    • Problems with IPv6 LinkLocal addresses fixed
    • New wizard for automated allocation of IP addresses and ports (IP Streamer)

    Version 2.4.0 to 2.4.1:

     

    • Support of the new encoder module UFX 894
    • Number of UFOmini systems to be cascaded increased to 4
    • UDP/RTP switching for IP backends (UFO 828/858)
    • New wizard for creating LCN lists for program distribution in the network (UFO 844)
    • Filtering of PIDs during SPTS transmission

    Important notes:

     

    • As of version 2.6.0, Linux with 32-bit is no longer supported
    • The installation package of the USW 800 for Linux does not contain a JRE anymore, because this is not common under Linux
    • A compatible JRE (version = 1.8.45) must be installed before installing USW 800
    • Due to increased security requirements for SSL encryption, the USW 800 version 2.4.0 or higher is no longer able to connect to systems on which an outdated firmware is installed

    Please update the firmware versions of the affected systems before installing version 2.6.0 of USW 800.

    The following firmware versions are not compatible with version > 2.4.0 of the USW 800:

     

    • UFX 800 (UFOcompact plus) < V03
    • UFO 87 < V02
    • UFO 87/CI < V03
    • UFO 83 < V02
    • UFO 83/CI < V03

    In addition, an updated satellite list is available within the software. This update is only available online within the software.

    The release notes of the satellite update list can be viewed in the update wizard.

    Download | zip-File | 159.41 MB | 21.03.2019
  • Management software USW 800 version 2.7.0 for Linux 64-Bit System

    Changes and improvements:

    Version 2.6.0 to 2.7.0:

    • Integration of the UFO 87-18
    • Integration of the UFO 87-187/CI

    Version 2.5.0 to 2.6.0:

    • Integration of the UFO 848

    Version 2.4.1 to 2.5.0:

    • Display "Analog signaling" at satellite inputs changed to "14/18V,22kHz".
    • Problems with IPv6 LinkLocal addresses fixed
    • New wizard for automated allocation of IP addresses and ports (IP Streamer)

    Version 2.4.0 to 2.4.1:

    • Support of the new encoder module UFX 894
    • Number of UFOmini systems to be cascaded increased to 4
    • UDP/RTP switching for IP backends (UFO 828/858)
    • New wizard for creating LCN lists for program distribution in the network (UFO 844)
    • Filtering of PIDs during SPTS transmission

    Important notes:

    • As of version 2.6.0, Linux with 32-bit is no longer supported.
    • The installation package of the USW 800 for Linux does not contain a JRE anymore, because this is not common under Linux.
    • A compatible JRE (version = 1.8.45) must be installed before installing USW 800.
    • Due to increased security requirements for SSL encryption, the USW 800 version 2.4.0 or higher is no longer able to connect to systems on which an outdated firmware is installed.
    • Please update the firmware versions of the affected systems before installing version 2.6.0 of USW 800.

    The following firmware versions are not compatible with version > 2.4.0 of the USW 800:

    • UFX 800 (UFOcompact plus) < V03
    • UFO 87 < V02
    • UFO 87/CI < V03
    • UFO 83 < V02
    • UFO 83/CI < V03

    In addition, an updated satellite list is available within the software. This update is only available online within the software.

    The release notes of the satellite update list can be viewed in the update wizard.

    Download | zip-File | 160.47 MB | 21.03.2019
  • Service-Tool "KUBdate" - Version 1.5

    Mit diesem Tool kann die Firmware des Aufbereitungssystems UFO 30 aktualisiert werden.
    Hierzu wird das Adapterkabel UFZ 30 (USB nach Mini-DIN) benötigt. Weitere Informationen sind unter der Produktbeschreibung für das Adapterkabel UFZ 30 verfügbar.

    Download | exe-File | 16.03 MB | 12.01.2015
  • Management Software USW 30 Version 4.3 for Windows

    Improvements and Changes:

    • Configuration of UFOnano headends (UFO 30)
    Download | zip-File | 39.63 MB | 12.09.2014

USB driver:

  • USB Driver 2.12.18 for Windows 7 to Windows 10

    Connect the cable to the PC:

    • Start the installation by starting the Setup in the ZIP archive.
    • You follow the instructions on the screen
    • After you complete of the installation installed the USB data cable for your Kathrein product.

    Note: You need to install the USB driver on your PC for which you will require administrator rights

    Download | zip-File | 2.07 MB | 11.10.2016
  • USB Driver 2.10.00 for Windows XP and Vista

    Connect the cable to the PC:

    • Start the installation by starting the Setup in the ZIP archive.
    • You follow the instructions on the screen
    • After you complete of the installation installed the USB data cable for your Kathrein product.

    Note: You need to install the USB driver on your PC for which you will require administrator rights

    Download | zip-File | 1.95 MB | 05.02.2016

Manuals

  • Bedienungsanleitung

    UFOnano Stand-alone-Kopfstelle 8fach-DVB-S(2) - QAM, Bohrschablone

    Download | pdf-File | 78.39 KB
  • Bedienungsanleitung

    UFOnano Stand-alone-Kopfstelle 8fach-DVB-S(2) - QAM

    Download | pdf-File | 2.17 MB
  • Operating manual

    UFOnano Standalone Head-End 8fach-DVB-S(2) - QAM, drilling template

    Download | pdf-File | 78.39 KB
  • Operating manual

    UFOnano Standalone Head-End 8fach-DVB-S(2) - QAM

    Download | pdf-File | 2.17 MB
  • Operating manual

    Third Party Software Contained in UFO 30

    Download | pdf-File | 792.10 KB
  • Notice d'utilisation

    UFOnano Standalone Head-End 8fach-DVB-S(2) - QAM, gabarit de perçage

    Download | pdf-File | 78.39 KB