MSK 115/S2

MSK 115/S2

Sat-Meter

Bestellnummer: 21710036

Satellite meter for optimal alignment of satellite systems in a handy, compact design; suitable for both DVB-S (SDTV) and DVB-S2 (HDTV). Display of signal strength and quality allowing optimal alignment of the antenna. In addition, the device features spectrum and constellation measurement for further monitoring. A default transponder and satellite list makes the meter easy to operate. Users can also set and save transponders. Software updates also allow the measuring instrument to be programmed for other user-specific satellite transponders. The measuring instrument is easy to operate and consequently the ideal tool for antenna installers during the installation of satellite systems.

 

Temporary technical data; subject to modification.

Merkmale

  • Measurement range: 950-2,150 MHz
  • Input level range: 34-99 dBµV
  • Input data rate: 1-45 MSymbol/s
  • Level and BER measurement (MER, DER with DVB-S2)
  • BER bar display in linear or logarithmic format
  • QPSK/8PSK constellation diagram
  • Display of the frequency spectrum with selectable span (60, 120, 240, 480, 960 and 1,200 MHz)
  • Display of carrier-to-noise ratio (C/N)
  • Display of optical signal quality and signal strength
  • Quick test for LNB current
  • Level display: either in dBµV or linear in 256 steps
  • Memory: 1,024 transponders/512 satellites
  • Pre-saved transponders; user can set additional transponders
  • Easy adjustment and change of satellite parameters through software updates (free of charge on the Kathrein website www.kathrein.de)
  • Measurement results can be saved to the device
  • Measurement results can be transferred to a PC by USB cable
  • Supply voltage through built-in battery
  • Battery capacity for more than three hours of continuous operation
  • Battery charging via external 12 V DC supply
  • LNB supply voltage: 14/18 V, max. 500 mA
  • Control signal: DiSEqCTM1.0, 22 kHz, SCR single-cable system control signals for ASTRA 19.2° and Hotbird 13.0°
  • RF input: 75 Ohm, F-type, with loop-through output (loop-through)
  • USB interface for software updates and data transmission
  • Includes carry case, RF cable with F-type plug, 230 V/12 V power supply unit, 12 V car power charger cable, USB connection cable, instruction manual with safety notes
  • Dimensions W x H x D (mm): 205 x 68 x 137
  • Weight: approx. 1.5 kg

Technische Daten

Merkmal Einheit Wert
Type MSK 115/S2
Order no. 217100236
Frequency range MHz 950-2,150
Impedance Ohm 75
Level range dBµV 34-99
Input symbol rate MSymb/s 1-45
LNB power supply V 13-18
LNB operating current mA Max. 450
Interfaces
Input/output -/Ohm F-type/75
USB port Socket, B-type
Power supply mm Hollow socket, 2.1/1.5
Battery power supply
Integrated battery (6-cell Lithium) mAh 2400
Battery voltage V 14.8
External power supply unit
Input voltage V AC 100-240
Output voltage V DC 12
Output current A DC 1.7
Operation modes
Spectrum display
Displayed bandwidth MHz 60, 120, 240, 480, 960, 1,200
Frequency display MHz 10,700-12,750
Signal level display
Carrier level dBµV 34-99
Measurement accuracy dB ± 1.5
C/N display
Signal-to-noise ratio dB Max. 20
Measurement accuracy dB ± 1.5
MER/BER display
MER dB Max. 20
Measurement accuracy dB ± 1.5
BER Min. 3,12 E-3
Measurement accuracy ppm 500
Additional operation modes
Constellation diagram 4/8 PSK quadrants
Histographic representation Carrier display in single-cable systems (up to 9 carriers)
General
Temperature range operation/storage °C 0 to +60/-20 to +85
Protection class (front panel) IP 54
LC display (Dot matrix, with backlighting) Pixels 128 x 64
Memory: Transponders Satellites Polarisations 1,024 512 H-V
DiSEqCTM commands (presaved): Sat-IF single-cable systems 16 polarities single-cable LNB, single-cable matrix for 1 to 2 satellites (ASTRA or ASTRA/Hotbird)
Dimensions (W x H x D) mm 207 x 67 x 137
Weight kg 1.5
VPE 1 1
EAN 1 4021121495632
VPE 2 5
EAN 2 4021121495649
Customs tariff number 90303200
| Programmtabellen | Software-Tools | USB-Treiber |

Programmtabellen:

  • Frequenz-Tabelle DVB-S V14; DVB-S2 V15

    Download | zip-Datei | 88.23 KB | 22.07.2016

Software-Tools:

  • Log Reader Version 1.09 für MSK 115/S2

    Download | zip-Datei | 46.41 KB | 10.06.2010

USB-Treiber:

  • USB-Treiber 2.10.00 für Windows XP und Vista

    Verbinden Sie das Kabel mit dem PC:

    • Starten Sie die Installation, indem Sie den Setup im ZIP Archiv starten.
    • Folgen Sie den Anweisungen auf dem Bildschirm
    • Nach Abschluss der Installation ist das USB Datenkabel für Ihr Kathrein Produkt installiert.

    Hinweis: Für die Installation des USB-Treibers benötigen Sie an Ihrem PC Administratorrechte

    Download | zip-Datei | 1.95 MB | 05.02.2016
  • USB-Treiber 2.12.12 für Windows 7 bis Windows 10

    Verbinden Sie das Kabel mit dem PC:

    • Starten Sie die Installation, indem Sie den Setup im ZIP Archiv starten.
    • Folgen Sie den Anweisungen auf dem Bildschirm
    • Nach Abschluss der Installation ist das USB Datenkabel für Ihr Kathrein Produkt installiert.

    Hinweis: Für die Installation des USB-Treibers benötigen Sie an Ihrem PC Administratorrechte

    Download | zip-Datei | 2.07 MB | 05.02.2016

Bedienungsanleitungen

  • Bedienungsanleitung

    Betriebsanleitung Digitales Messgerät

    Download | pdf-Datei | 1.06 MB
  • Bedienungsanleitung

    Beiblatt für die Tasche des Sat-Meter

    Download | pdf-Datei | 58.84 KB
  • Operating manual

    Betriebsanleitung Digitales Messgerät

    Download | pdf-Datei | 1.06 MB