Service - Software and Download - Measuring instruments - MSK 125

No warranty can be accepted for any eventually occuring damage when transfering and loading the frimware onto the MSK 125.

MSK 125 Firmware

MSK 125 Version 1.6 (Main) and Version V1.5 (Slave)

New Functions and Improvements available with the MSK 125 Update Software V1.4 to V1.6.

Note:

Bei diesem Udpate muss die Main (V1.6) - Softwareversion aktualisiert werden.

For this update the following connection cables are required:

Main processor update (serial cable) Order no.: 19700770

These cables can be ordered from our service company ESC GmbH.

www.esc-kathrein.de


Downloads
Update Version 1.6 for Main Processor over the serial interface msk125_update_v1.6.zip 07.03.2011 224 kByte
Update Version 1.5 for Slave Processor over the USB interface msk125_update_slave_USB_v1.5.zip 14.09.2009 473 kByte
Update guide msk125_software_update_guide.pdf 07.04.2009 102 kByte
Conversion programme for saved measurements into Office Documents Version 1.1 msk-converter-1.1-setup.zip 07.04.2009 6,01 MB
USB driver for Windows 2000/XP usb-treiber_msk125.zip 02.04.2009 61 kByte

  Older Firmware Versions:
MSK 125 Version V1.2 (Main) and Version V1.5 (Slave)
Update Version 1.2 for Main-Processor over the seriell interface
msk125_update_main_seriell_v1.2.zip, 14.09.2009

Update Version 1.5 for Slave-Processor over the USB-Interface
msk125_update_slave_USB_v1.5.zip, 14.09.2009

Extended Functions on the MSK 125 (to SW V 1.2 from SW Version 1.1)
  • LO selection and display in the LNB menu
  • Change from SAT IF frequency to transponder frequency with the key CH/FRQ.
  • Single Cale (SCIF) implemented
  • SAT narrow spectrum
  • Return path spectrum and receiver mode, inclusve saving
  • Display of NIT data
  • Call up of DVB from spectrum mit acceptance of the given frequency
  • Frequency/Channel mode from DVB using the key FRQ/CHAN now implemented
  • SD-card formating over SETUP
Note:

Both the main (V1.2) and slave (V1.5) software versions must be updated when carrying out this update.

For this update the following connection cables are required:

Main processor update (serial cable) Order no.: 19700770
Slave processor update (USB cable) Order no.: 19700658
msk125_udpate_v1.1.zip, Version 1.1, 04/2009

New Features:
  • FM radio in Stereo (Head-phones and SCART) Audio level standardised
  • Stereo enabled in analogue SAT
  • Channel bandwidth in DVB-C, Std. B/G, VHF 8 MHz
  • Keyboard entries also possible during active screen display
  • Data-logger function implemented
  • DiSEqC telegramme length, extended from 5 to 6 Byte
  • Spectrum Recall measure
  • Spectrum Store settings
  • In DVB-T display of BER in CBER or VBER
  • Selection is in the PAT-list mode or in MPEG-picture
Improvements:
  • When all 10 memory positions for spectrum displays are occupied, an error report is generated
  • The spectrum memory is deleted when the whole memory bank from position 0 to 99 is deleted
  • Error in Std D/K stereo solved. Stereo selection is now displayed in the Sound Menu

Should you have problems to install the new firmware, then please contact our technical support group at KATHREIN-Werke in Rosenheim under the call number +49 8031 184-700.

KATHREIN-Werke KG Rosenheim
last update 07.03.2011